What Jobs are available for Scientific Research & Development in the United States?

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Specialist, Quality Engineer

Job Code: 27669

Job Location: Huntsville, AL

Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off

Job Description:

The Aerojet Rocketdyne Segment of L3Harris is seeking aSpecialist, Quality Engineer to work at either our existing state-of-the-art Advanced Manufacturing Facility (AMF) in Toney, AL, and/or our new, AMF in Huntsville, AL , which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. The Specialist, Quality Engineer works under moderate supervision to set objectives for own job area. Communicates with contacts inside and outside own team to explain and interpret operational processes, practices, and procedures Identifies and addresses changes within own job area. Works to achieve operational targets with some impact on departmental results.

Essential Functions:

Leverages engineering expertise to facilitate communication and coordination among Integrated Product Team (IPT) members, suppliers, program office, and customers. Ensures that contractual requirements, hardware specifications, and key quality metrics are met, or ensures corrective actions are implemented and verified effective.

• Apply modern quality principles and methods, including Lean and Six Sigma, to aerospace manufacturing operations.

• Interpret engineering drawings, specifications, and contractual requirements to ensure compliance and flow down of applicable requirements.

• Lead or interface with the Material Review Board (MRB) for nonconforming material disposition, driving timely completion of actions.

• Develop, implement, and maintain quality assurance processes for high product and service standards, regularly assessing the health those functional processes.

• Investigate production issues, conduct root cause analysis, take corrective actions, and verify effectiveness through effective application of a Corrective Action Board (CAB) process.

• Analyze manufacturing quality data to identify trends and areas for improvement.

• Lead data-driven continuous improvement initiatives to enhance product quality and manufacturing process efficiency.

• Interface with Supplier Quality Engineering to resolve supplier-related issues.

• Work with Integrated Product Teams (IPT) to identify and mitigate program risks through the program’s Risk and Opportunity Management Board process.

• Present quality metrics to customers, providing assessment and actions to drive improvement.

• Assess the need for First Article Inspections (FAIs) based on trigger events defined in AS9102 and/or contractual flowdown, and facilitate their completion.

• Up to 10% business travel to L3harris and customer sites.

• Ability to obtain US Security Clearence.

Qualifications:

• Bachelor’s Degree and minimum 4 years of prior Quality experience. Graduate Degree and a minimum of 2 years of prior Quality experience. In lieu of a degree, minimum of 8 years of prior Quality experience.

Preferred Additional Skills:

• Experience collaborating within a Microsoft 365 environment, with proficiency in the included applications (e.g. Word, Excel, PowerPoint, Teams)

• Project Management experience.

• Supplier/Customer Support expereince.

• Regulatory & Auditing (AS9100) in the Aerospace and Defense Industry.

• Statistical Analysis experience.

• Risk Management experience.

#LI-MRW

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Quad, Chalfont, PA is looking for a Quality Service Representative. 
Description of Duties: Responsible for verifying printed and/or finished product in accordance with customer requirements, Quad/Graphics specifications, general Mail specifications and job instruction as required.
Essential Functions of Position: The Quality Service Representative is responsible for supporting quality practices in the printing and finishing product. Other duties include processing and shipment of Customer samples as required, following written procedures and completing Data entry and paperwork as required. QSR also relay Quality concerns with Press/Finishing Operator, Supervisors, Management and Customer Service Representative as warrant . QSR also maintaining Quality Control records in support of both Press and Finishing production.
- Processing Customer samples includes:
1. Assisting Manufacturing during the production of samples as requested or required.
a. Being at Press while the Customer samples are be produced, looking for obvious format, functionality, print and finishing quality issues or concerns.
2. Spot checking of samples to ensure timely awareness of questionable product concerns.
a. More in depth checking of position and workability of product and verification of the Samples for the Customer requirement, Quad/Graphics specifications, general Mail specifications and job instructions. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color and postal specs.
3. Complete sample paperwork and data entry in accordance with department practices and procedures.
4. Manually go through the Customer sample, put into bundles and label bundles as required.
a. This may involve opening product and look through the panel for noticeable defect or for the criteria that was required, no longer is compliable.
5. Pack bundles into carton, produce a shipping label and send samples as required.
- Verifying Print and or copy:
1. Visually check the printed Roll sheet against the Digital Blue Line for copy, ID’s, layout and the color as required.
- Auditing Finishing:
1. Randomly checking live production or QC Documents as being produce in accordance with customer requirement, Quad/Graphics specifications, general Mail specification and the job instruction as required.
a. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color, postal spec and overall quality of the product.
b. Insuring the special instruction on the Finishing Ticket are being followed and elevate any concerns of the product or requirements to the Press Operator, Supervisor, Management and Customer Service Representative as needed.
c. Completing Data Entry as required
- Maintaining of QC records:
1. Remove full cartons of QC. Documents from the Finishing presses, place on skid/pallets, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an adjustable cart to move full cartons, tape gun and a pallet jack to move skid/pallet of cartons as needed.
2. Remove full cartons of Roll pulls from the table, place on skid/pallet, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an tape gun and a pallet jack to move full pallets of cartons as needed.
Marginal Functions of Job:
- The ability to move trays and/or cartons up to 45 lbs.
- The ability to visual and physically inspect and test product functionality.
- The ability to sit, stand and or walk for 12 hours, 4-6 days per week with overtime as production requires.
- The ability to communicate with others and give directions.
- The ability to use a pallet jack, tape gun, scissors, utility knife, trimmer, water stick, ruler, letter opener, glue stick, Postal Template, Micrometer and Densitometer.
- The ability to use a computer and copier.
Work Schedule:
- 11 PM - 7 AM
- Overtime as needed
- Self paced work flow
Personal Protective Equipment Required:
- Hearing Protection
- Steel Toe Shoes
- Safety Glasses
Environment:
- 50% office
- 50% Production

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

Quad, Chalfont, PA is looking for a Quality Service Representative. 
Description of Duties: Responsible for verifying printed and/or finished product in accordance with customer requirements, Quad/Graphics specifications, general Mail specifications and job instruction as required.
Essential Functions of Position: The Quality Service Representative is responsible for supporting quality practices in the printing and finishing product. Other duties include processing and shipment of Customer samples as required, following written procedures and completing Data entry and paperwork as required. QSR also relay Quality concerns with Press/Finishing Operator, Supervisors, Management and Customer Service Representative as warrant . QSR also maintaining Quality Control records in support of both Press and Finishing production.
- Processing Customer samples includes:
1. Assisting Manufacturing during the production of samples as requested or required.
a. Being at Press while the Customer samples are be produced, looking for obvious format, functionality, print and finishing quality issues or concerns.
2. Spot checking of samples to ensure timely awareness of questionable product concerns.
a. More in depth checking of position and workability of product and verification of the Samples for the Customer requirement, Quad/Graphics specifications, general Mail specifications and job instructions. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color and postal specs.
3. Complete sample paperwork and data entry in accordance with department practices and procedures.
4. Manually go through the Customer sample, put into bundles and label bundles as required.
a. This may involve opening product and look through the panel for noticeable defect or for the criteria that was required, no longer is compliable.
5. Pack bundles into carton, produce a shipping label and send samples as required.
- Verifying Print and or copy:
1. Visually check the printed Roll sheet against the Digital Blue Line for copy, ID’s, layout and the color as required.
- Auditing Finishing:
1. Randomly checking live production or QC Documents as being produce in accordance with customer requirement, Quad/Graphics specifications, general Mail specification and the job instruction as required.
a. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color, postal spec and overall quality of the product.
b. Insuring the special instruction on the Finishing Ticket are being followed and elevate any concerns of the product or requirements to the Press Operator, Supervisor, Management and Customer Service Representative as needed.
c. Completing Data Entry as required
- Maintaining of QC records:
1. Remove full cartons of QC. Documents from the Finishing presses, place on skid/pallets, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an adjustable cart to move full cartons, tape gun and a pallet jack to move skid/pallet of cartons as needed.
2. Remove full cartons of Roll pulls from the table, place on skid/pallet, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an tape gun and a pallet jack to move full pallets of cartons as needed.
Marginal Functions of Job:
- The ability to move trays and/or cartons up to 45 lbs.
- The ability to visual and physically inspect and test product functionality.
- The ability to sit, stand and or walk for 12 hours, 4-6 days per week with overtime as production requires.
- The ability to communicate with others and give directions.
- The ability to use a pallet jack, tape gun, scissors, utility knife, trimmer, water stick, ruler, letter opener, glue stick, Postal Template, Micrometer and Densitometer.
- The ability to use a computer and copier.
Work Schedule:
- 11 PM - 7 AM
- Overtime as needed
- Self paced work flow
Personal Protective Equipment Required:
- Hearing Protection
- Steel Toe Shoes
- Safety Glasses
Environment:
- 50% office
- 50% Production

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

Quad, Chalfont, PA is looking for a Quality Service Representative. 
Description of Duties: Responsible for verifying printed and/or finished product in accordance with customer requirements, Quad/Graphics specifications, general Mail specifications and job instruction as required.
Essential Functions of Position: The Quality Service Representative is responsible for supporting quality practices in the printing and finishing product. Other duties include processing and shipment of Customer samples as required, following written procedures and completing Data entry and paperwork as required. QSR also relay Quality concerns with Press/Finishing Operator, Supervisors, Management and Customer Service Representative as warrant . QSR also maintaining Quality Control records in support of both Press and Finishing production.
- Processing Customer samples includes:
1. Assisting Manufacturing during the production of samples as requested or required.
a. Being at Press while the Customer samples are be produced, looking for obvious format, functionality, print and finishing quality issues or concerns.
2. Spot checking of samples to ensure timely awareness of questionable product concerns.
a. More in depth checking of position and workability of product and verification of the Samples for the Customer requirement, Quad/Graphics specifications, general Mail specifications and job instructions. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color and postal specs.
3. Complete sample paperwork and data entry in accordance with department practices and procedures.
4. Manually go through the Customer sample, put into bundles and label bundles as required.
a. This may involve opening product and look through the panel for noticeable defect or for the criteria that was required, no longer is compliable.
5. Pack bundles into carton, produce a shipping label and send samples as required.
- Verifying Print and or copy:
1. Visually check the printed Roll sheet against the Digital Blue Line for copy, ID’s, layout and the color as required.
- Auditing Finishing:
1. Randomly checking live production or QC Documents as being produce in accordance with customer requirement, Quad/Graphics specifications, general Mail specification and the job instruction as required.
a. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color, postal spec and overall quality of the product.
b. Insuring the special instruction on the Finishing Ticket are being followed and elevate any concerns of the product or requirements to the Press Operator, Supervisor, Management and Customer Service Representative as needed.
c. Completing Data Entry as required
- Maintaining of QC records:
1. Remove full cartons of QC. Documents from the Finishing presses, place on skid/pallets, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an adjustable cart to move full cartons, tape gun and a pallet jack to move skid/pallet of cartons as needed.
2. Remove full cartons of Roll pulls from the table, place on skid/pallet, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an tape gun and a pallet jack to move full pallets of cartons as needed.
Marginal Functions of Job:
- The ability to move trays and/or cartons up to 45 lbs.
- The ability to visual and physically inspect and test product functionality.
- The ability to sit, stand and or walk for 12 hours, 4-6 days per week with overtime as production requires.
- The ability to communicate with others and give directions.
- The ability to use a pallet jack, tape gun, scissors, utility knife, trimmer, water stick, ruler, letter opener, glue stick, Postal Template, Micrometer and Densitometer.
- The ability to use a computer and copier.
Work Schedule:
- 11 PM - 7 AM
- Overtime as needed
- Self paced work flow
Personal Protective Equipment Required:
- Hearing Protection
- Steel Toe Shoes
- Safety Glasses
Environment:
- 50% office
- 50% Production

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

Quad, Chalfont, PA is looking for a Quality Service Representative. 
Description of Duties: Responsible for verifying printed and/or finished product in accordance with customer requirements, Quad/Graphics specifications, general Mail specifications and job instruction as required.
Essential Functions of Position: The Quality Service Representative is responsible for supporting quality practices in the printing and finishing product. Other duties include processing and shipment of Customer samples as required, following written procedures and completing Data entry and paperwork as required. QSR also relay Quality concerns with Press/Finishing Operator, Supervisors, Management and Customer Service Representative as warrant . QSR also maintaining Quality Control records in support of both Press and Finishing production.
- Processing Customer samples includes:
1. Assisting Manufacturing during the production of samples as requested or required.
a. Being at Press while the Customer samples are be produced, looking for obvious format, functionality, print and finishing quality issues or concerns.
2. Spot checking of samples to ensure timely awareness of questionable product concerns.
a. More in depth checking of position and workability of product and verification of the Samples for the Customer requirement, Quad/Graphics specifications, general Mail specifications and job instructions. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color and postal specs.
3. Complete sample paperwork and data entry in accordance with department practices and procedures.
4. Manually go through the Customer sample, put into bundles and label bundles as required.
a. This may involve opening product and look through the panel for noticeable defect or for the criteria that was required, no longer is compliable.
5. Pack bundles into carton, produce a shipping label and send samples as required.
- Verifying Print and or copy:
1. Visually check the printed Roll sheet against the Digital Blue Line for copy, ID’s, layout and the color as required.
- Auditing Finishing:
1. Randomly checking live production or QC Documents as being produce in accordance with customer requirement, Quad/Graphics specifications, general Mail specification and the job instruction as required.
a. This includes but not limited to measuring, testing glues, labels, perfs, personalizing, color, postal spec and overall quality of the product.
b. Insuring the special instruction on the Finishing Ticket are being followed and elevate any concerns of the product or requirements to the Press Operator, Supervisor, Management and Customer Service Representative as needed.
c. Completing Data Entry as required
- Maintaining of QC records:
1. Remove full cartons of QC. Documents from the Finishing presses, place on skid/pallets, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an adjustable cart to move full cartons, tape gun and a pallet jack to move skid/pallet of cartons as needed.
2. Remove full cartons of Roll pulls from the table, place on skid/pallet, record information and have the full pallet placed into storage as outlined in procedures.
a. This includes using an tape gun and a pallet jack to move full pallets of cartons as needed.
Marginal Functions of Job:
- The ability to move trays and/or cartons up to 45 lbs.
- The ability to visual and physically inspect and test product functionality.
- The ability to sit, stand and or walk for 12 hours, 4-6 days per week with overtime as production requires.
- The ability to communicate with others and give directions.
- The ability to use a pallet jack, tape gun, scissors, utility knife, trimmer, water stick, ruler, letter opener, glue stick, Postal Template, Micrometer and Densitometer.
- The ability to use a computer and copier.
Work Schedule:
- 11 PM - 7 AM
- Overtime as needed
- Self paced work flow
Personal Protective Equipment Required:
- Hearing Protection
- Steel Toe Shoes
- Safety Glasses
Environment:
- 50% office
- 50% Production

We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.

Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.

Drug-Free Workplace

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: NDT Level III RT/DR/UT/PT, Quality Engineering Specialist

Job Code: 28124

Job Location: Canoga Park, CA

Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off

Aerojet Rocketdyne, an L3Harris company, is seeking a NDT Level III RT/DR/UT/PT, Quality Engineering Specialist to join our team in Canoga Park, California.

Essential Functions:

• Review supplier-submitted NDT technique sheets for compliance to AR-Los Angeles specifications and drawing requirements. Coordinate with suppliers on the development and approval of these technique sheets. Prepare necessary reports.
• Manage site NDT supply base by monitoring suppliers to ensure flow down of AR requirements to sub-tier suppliers, audit existing NDT suppliers and assess potential new NDT suppliers for their ability to meet site requirements.
• Review process specifications, in-house technique sheets, etc. as noted above under job responsibilities.
• Provide training and testing to L I and L II.
• Develop, review and approve NDT techniques with L II personnel.
• Write, review and approve specifications pertinent to NDT.
• Support review boards for inspectability of product.
• Prepare NDT for customer and internal audits.
• Develop and Lead Corrective action reviews on audit/NCR findings.
• Maintain own L III certifications.
• Participate in the direction of the NDT department.
• Audit and surveillance of quality systems and processes.

Qualifications:

• Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience.

Preferred Additional Skills:

• Requires NDT LVL III RT (Radiography), DR (Digital Radiography), UT (Ultrasonic), or PT (Penetrant) certifications.
• Needs to have direct experience with the testing of Aerospace Metallic products
• Must have Level 3 ASNT Certification and/ or currently active NAS410 Level III certifications
• Hands-on working experience in a manufacturing environment and a corresponding understanding of manufacturing processes is essential.
• Experience with auditing practices and Process Certification is desired.
• A demonstrated proficiency with a variety of NDT inspection techniques and equipment along with a working knowledge of blueprint reading and interpretation is required.
• Knowledge of industry NDT standards (ex. NAS410, ASTM 1742, ASTM 1417, ASTM 1444, AMS-STD-2154, etc.) is required.
• Candidate must meet requirements of NAS-410.
• Must have demonstrated excellent interpersonal, written and verbal communication skills, as well as the ability to work well in a team environment.
• Must possess strong computer skills and be well-organized.
• Position requires responding to customer needs and may include weekend work.
• Auditing experience/certification desired.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $114,000 - $12,000. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is 99,500 - 184,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Registered Nurse (RN) - Quality Assurance

Job Summary: The RN Quality Assurance is responsible for evaluating healthcare services and processes to ensure compliance with standards and regulations. This role involves data analysis, auditing patient records, and implementing improvement plans.

• Audit patient documentation and procedures for adherence to quality standards.
• Collaborate with clinical teams to identify and address areas needing improvement.
• Collect, analyze, and report performance data related to patient care outcomes.
• Develop training programs to uphold quality and regulatory requirements.
• Recommend best practices and track the impact of quality interventions.

• Hospital administrative departments or specialized quality assurance units.
• Emphasizes analytical skills and attention to detail.

• Competitive salary and benefits package.
• Opportunities for professional development in healthcare quality and safety.
• Collaborative environment focusing on continuous improvement.
• Influence on policy-making and patient care standards.

We are committed to delivering exceptional patient care and continual quality enhancement. Join our Quality Assurance team to drive best practices and elevate healthcare standards.

Information based on the BLS and actual job responsibilities may vary by location.

Required

Preferred

Job Industries

• Other

This position is responsible for ensuring the organization complies with applicable company and customer requirements, including federal, state, and local procedures, codes, regulations, and requirements established in federal contracts. The Quality Control Specialist will accomplish this by conducting inspections on various company-performed work activities, including preventive, corrective, unplanned, and Work Orders, as well as inspections on work conducted by subcontractors.

This role requires a strong understanding of quality management systems and processes, as well as excellent communication and problem-solving skills. The ideal candidate will have experience in a maintenance/construction specific trade such as HVAC, Electrical or Plumbing, and be familiar with federal and state regulations, codes and guidelines for trades work.

The Quality Control Specialist will be responsible for:

• Inspecting both work in progress and completed tasks for discrepancies / deficiencies in accordance with the Quality Management System documents (manuals, plans, procedures, instructions, etc.), contract requirements, and other applicable requirements.
• Identifying and evaluating nonconforming work and services (including contracted services and purchased materials) and issuing discrepancies and/or corrective actions and preventive actions (CAPA), as appropriate.
• Initiating CAPA through the Quality Program Manager (QPM) or Quality Supervisor (QS) to address significant issues.

The successful candidate will have a high school graduate or equivalent GED, five years of experience in a maintenance/construction specific trade, and familiarity with federal and state regulations, codes and guidelines for trades work. They will also be able to read and interpret requirements in order to inspect/audit them for conformity, and maintain records in both hardcopy and electronic file storage.

A strong background in quality management principles, process improvement, and effective communication is essential for this role. Additionally, the ability to work independently and as part of a team, and handle multiple priorities and deadlines is required.

This position offers a unique opportunity to join a dynamic team and contribute to the success of our organization. If you are a motivated and detail-oriented individual with a passion for quality and excellence, we encourage you to apply.

As a skilled nurse, you will provide exceptional patient care in a dynamic and supportive environment. Your expertise will be essential in delivering high-quality nursing services, utilizing the nursing process to assess, diagnose, plan, intervene, and evaluate patient outcomes.

Key responsibilities include:

• Meeting expectations of one's competencies as a healthcare leader
• Providing individualized care using the nursing process, including assessment, diagnosis, planning, intervention, and evaluation for assigned patients
• Addressing complex psychological, emotional, cultural, and social needs of patients and their families
• Administering medications and treatments, monitoring side effects and effectiveness
• Documenting patient history, symptoms, medication, and provided care
• Assessing learning needs and providing education to patients, family members, and caregivers